BRXCG - HIGH DENSITY TONER FOR SERIES III 30/40/50/60/70/85

  • MSDS: BRXCG
  • Manufacturer: IBM CORP
  • Product Name: HIGH DENSITY TONER FOR SERIES III 30/40/50/60/70/85
  • National Stock Number: 6850-00F029780
Product Identification

Product ID:HIGH DENSITY TONER FOR SERIES III 30/40/50/60/70/85
MSDS Date:09/13/1991
FSC:6850
NIIN:00F029780
MSDS Number: BRXCG

Responsible Party
IBM CORP
OLD ORCHARD RD
ARMONK, NY 10504
US

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: 7N876

Contractor
IBM CORP
ARMONK, NY 10504 US

Telephone: 716-722-5151

Cage: 7N876

Ingredients

AMORPHOUS FUSED SILICA, SILICON DIOXIDE, QUARTZ, SILICON

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 1-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


STYRENE *93-1*

CAS: 25213-39-2

Fraction By Weight: <70%


DIMER FATTY ACID, ETHYLENEDIAMINE, 1,2-DIAMINOPROPANE

CAS: 68650-54-4

Fraction By Weight: <70%


STYRENE COPOLYMER *93-1*

CAS: 25119-62-4

Fraction By Weight: <20%


ROSIN, MALEIC ACID POLYMER *93-3*

CAS: 8050-28-0

Fraction By Weight: <20%


COLUMBIA CARBON, CARBON BLACK, LAMPBLACK (SUSPECTED HUMAN

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 5-10%

OSHA PEL 3.5 MG/CUM

ACGIH TLV: 3.5 MG/CUM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/INGESTION/SKIN: LOW HAZARD.
EYES: MAY BE IRRITATING. OVEREXPOSURE TO CARBON BLACK DUST MAY
RESULT IN IRRITATION OF RESPIRATORY TRACT & PNEUMOCONIOSIS.
Explanation of Carcinogenicity:SEE INGREDIENTS

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER. SKIN: WASH AFTER EACH CONTACT. INGESTION: DRINK 1-2 GLASSES
OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Extinguishing Media:WATER SPRAY, DRY CHEMICAL, CO2, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING
Unusual Fire/Explosion Hazard:FIRE/EXCESSIVE HEAT MAY CAUSE PRODUCTION
OF HAZARDOUS DECOMPOSITION PRODUCTS. MOST ORGANIC MATERIALS IN
POWDER FORM ARE CAPABLE OF CREATING A DUST EXPLOSION.

Accidental Release

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER & PLACE IN FIBER
CARTON.

Handling

Handling and Storage Precautions:KEEP FROM CONTACT W/OXIDIZING
MATERIALS.

Exposure Controls

Respiratory Protection:AS REQUIRED
Ventilation:TYPICALLY 10 ROOM VOLUMES PER HOUR IS CONSIDERED GOOD
GENERAL; RATES SHOULD MATCHED TO CONDIITIONS OF USE
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:65C (149F)
Vapor Pres:NEGLIGIBLE
Spec Gravity:0.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDERY POLYMERIC MATERIAL, ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:FIRE OR EXCESSIVE HEAT
Hazardous Decomposition Products:CO2 & CO, OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:DISPOSE IN AN APPROVED INCINERATOR OR CONTRACT
W/LICENSED CHEMICAL WASTE DISPOSAL SERVICE. SMALL QUANTITIES MAY BE
DISPOSED OF IN AN APPROVED SANITARY LANDFILL. DISCHARGE, TREATMENT
OR DISPOSAL MAY BE SUBJECT TO FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.